Ups Worldship Zebra Printer Drivers Install Update
Once approved, your order will be compiled and prepared for shipping. If an item within an order is backordered, it may be shipped separately.
If you purchased your product directly from Zebra Technologies you may return it for full credit within 30 days from shipment as long as it is in like-new condition. Please be sure to have your credit card available when you call. If you purchased your product through a retail location or from a reseller you may be eligible for a full credit within the retailer or reseller's return policy.
Contact the retail location or reseller where you purchased the product, as return policies may vary. Return of product will not be accepted unless the RMA number is clearly marked on the outside of the box. The printer is now ready for use with your UPS software. If the light remains red or amber, repeat the procedure. If light remains red or amber, return your printer for service. For printers purchased by customers Hardware purchased through CTP is customer owned hardware and any technical support or service is provided by Zebra:.
Zebra services and returns the original printer within 5 to 7 business days. You are responsible for one-way shipping charges using a trackable shipping method. Zebra advance ships a replacement printer with a return shipping label within business days.
You return your defective printer, using the packaging and return shipping label from the advance exchange printer. How soon will my order be approved?
Credit card orders are approved instantly. What if I have questions about my order after I place it? You will need your order confirmation number. What do the different terms within Order Status mean? When can I expect to receive my printer? Does the printer come with UPS shipping software? Where can I obtain UPS shipping labels for my printer? You can order labels online at www. What size and type of labels does the printer use?
Zebra printers are compatible with all standard UPS shipping labels, including 4"x6. Your printer will also accommodate other label sizes for other applications. What else do I need in order to print UPS labels? The Zebra printers come with a sample roll of UPS labels, power supply, communications cable not on internal Ethernet versions , and drivers. Additional labels may be ordered online at www. What if I need to return my printer?
How can I obtain a scale? Scales are available directly from the scale manufacturer not Zebra. Where can I order spare parts for my printer? There is a limited supply of spare parts available for purchase on this site. Visit the Accessories section for more information.
For replacement of factory-installed parts you may need to send your printer for repair. To order blank labels from UPS, visit www. For other label needs, such as file folder or shelf labeling, please visit www. What size and type of UPS labels does the printer use? For other label needs please visit www. What if I need technical support for my printer?
For Zebra Hardware Support: How can I obtain software or drivers for my printer? Printer installation instructions are located at the following sites: How do I install my thermal printer driver for WorldShip on my Zebra printer? Printer installation instructions for WorldShip can be found at www. Find drivers for your printer within this site. This site is updated frequently with this information. Can I use this printer with UPS software? Printer drivers are located on the WorldShip software directory on your system.
The driver's path to the Foss driver directory is C: For complete instructions for installing your printer's driver, see "How do I install the UPS label printer driver? Your printer's firmware is custom-formatted for UPS applications. Downloading Zebra firmware to your printer will only cause damage. Where can I locate a driver for the printer? I'd like to use my label printer with another Windows application. Where can I locate a Windows driver for the printer?
You can use the same printer driver that operates with UPS WorldShip software to print from another Windows application. What connections and operating systems are compatible with my printer? Ethernet is an available option for these printers. Can I send End of Day reports to my bar code label printer?
UPS software does not currently support printing End of Day reports to bar code label printers. You will need to send your End of Day reports to your laser or dot matrix printer. How often will I need to change the ribbon or ink cartridge? There is no ribbon or cartridge on your printer. How can I obtain a User Manual for my printer?
The light surrounding the feed switch is red or amber. What does that mean? The light surrounding the feed switch should be green. A red light may indicate that your printer's sensors are not calibrated properly to the labels. You can perform a calibration procedure as follows: Make sure that media is properly loaded and the cover is completely closed.
Turn off the printer. Press and hold the feed button. Turn the power on while holding the feed button for 2 seconds only. Release the feed button.
Wait for calibration labels to feed and configuration label to print. Turn power back on. The light surrounding the feed button should be green. Press the feed button and verify that one label advances to "tear" position. Remove the blank label. There is no light on the feed button. Confirm that you have connected your printer to a power source and inserted the powered barrel into the printer.
Check to make sure the power switch is on. If there is still no light, return your printer for service. Printing is light in sections of the label. What should I do? Clean the printhead with a cleaning pen. If print quality is poor, it is possible that your labels are poor quality.
Try loading a new roll of labels and perform the "Dump Mode" process again. If print quality is still inconsistent, return your printer for service. Learn about Warranty and Return Material Authorization. My printer is printing symbols and characters instead of shipping information. How can I correct this?
Make sure your printer is not in "Dump Mode. Press and hold down the feed button. When the indicator light flashes red, release the feed button. When the indicator light flashes green, press and hold down the feed button.
Zebra ZP450 Printer Driver Information and Details
Once approved, your order will be compiled and prepared for shipping. If an item within an order is backordered, it may be shipped separately. If you purchased your product directly from Zebra Technologies you may return it for full credit within 30 days from shipment as long as it is in like-new condition. Please be sure to have your credit card available when you call. If you purchased your product through a retail location or from a reseller you may be eligible for a full credit within the retailer or reseller's return policy. Contact the retail location or reseller where you purchased the product, as return policies may vary.
Two Identical workstation running Windows 8. Upgraded one to Windows Worked great, everything worked, printed labels, booted faster seemed faster overall than the Windows 8. Then in late August an automatic update came from Microsoft. Clicking on the printer I could see that somehow the first job was still in the queue said Printing.. Shutdown reboot - the first label would print again. But no other labels. Cancel all stuck jobs. In this state I could print ONE label.