Toshiba E Studio 2040c Driver Download Latest

By Rodrigo

Toshiba E Studio 2040c Driver Download Install Update

Company names and product names in this manual are the trademarks or registered trademarks of their respective companies.

In addition, this manual is expected to facilitate the marketing of Toshiba MFPs to prospective customers that have a specific demand for image quality and the expansion of sales. Purpose of the Imaging Manual Icons The following icons used in this manual denote the following: But "USER" can also be selected to allow the user to operate it.

After performing automatic calibration, print and check the image quality. If further image quality adjustments are still necessary, use the next procedure. Adjustment of R Red: Adjust Y Yellow and M Magenta. Adjustment of G Green: Adjust Y Yellow and C Cyan. Adjustment of B Blue: Adjust M Magenta and C Cyan. Adjust the value for [05] code corresponding to the paper type for which you would like to improve the image quality. Set the value within a range of "2" to "8" to optimize the halftones.

After performing the adjustment, print and check the image quality. If further image quality adjustment is necessary, go to step 3. After setting the value, print and check the image quality. Then perform the adjustment again. After the adjustment The image contrast varies, depending on the The image quality is constantly maintained. Enter adjustment mode [05].

This results in reducing the life of consumables. MFP performance, including degradation in the image quality and a reduction in the life of the consumables. Otherwise, it may cause a loss in MFP performance, including slowdown in the copying or printing speed.

This facilitates identifying out-of-registration colors in the subsequent adjustment. Use only the second page of the test print pattern. Therefore, carefully perform the adjustment, while checking the copy or print image. For instance, if the center value is increased by 25 sharper , the value of each step of the indicator will also be increased by 25 sharper.

After increasing the copy density, copy and check the copy image quality. Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a loss in MFP performance, including degradation in the image quality and a reduction in the life of the consumables. After setting the value, copy and check the image quality. If further image quality adjustment is necessary, go to the next step.

Performing either of the adjustments and then another adjustment clears what has been previously adjusted. For example, using procedure 3 and then procedure 4 clears the adjusted hue using procedure 3. After adjusting the hue, copy and check the copy image quality. Refer to the table below and set the subcode for the area to be adjusted. After performing automatic calibration, copy and check the copy image quality. After adjusting the tint of colors, copy and check the copy image quality. If further image quality adjustments are still necessary, the service technician must use the next procedure.

After setting the values, copy and check the copy image quality. Only if the vividness of R Red is still insufficient even after all the above procedures have been used, must the service technician use the next procedure. After increasing the background density, copy and check the copy image quality.

With the background density set to the maximum, if further image quality adjustments are still necessary, the service technician must use the next procedure.

With the copy density set to the maximum, if further image quality adjustments are still necessary, the service technician must use the next procedure. After adjusting the background density, copy and check the copy image quality. Remarks Enter a value within the recommended value range mentioned in the procedures. Otherwise, it may cause a loss in MFP performance, including degradation in the image quality.

If further image quality adjustments are still necessary, or background elimination is necessary according to color, use the next procedure. Low-density area Medium-density area After adjusting the background density, copy and check the copy image quality. When a double-sided original printed on thin paper, such as a brochure and leaflet, is copied, the images seen through the back of the page are also copied.

Perform background adjustment, in order to avoid this problem. With the copy density set to the minimum, if the images seen through the back of the page are still copied, or if you would like to prevent this problem without changing the copy density of text, use the next procedure.

Range correction operation Fixed Varied After adjusting the background peak, copy and check the copy image quality. On the other hand, the value for manual offsetting adjustment for background processing will be applied, only if the manual copy density mode is selected.

Then use other procedures. Enter setting mode [08]. Set "1" for code []. After changing the default original mode option, copy and check the copy image quality.

After increasing the sharpness intensity, copy and check the copy image quality. Otherwise, it may cause a loss in copier performance, including degradation in the image quality. After decreasing the sharpness intensity, copy and check the copy image quality. Intended to improve the reproducibility of text more Sharp than the one obtained when "4" is set. After adjusting the tint of black, copy and check the copy image quality.

If further image quality adjustment is necessary even after the tint of black was set to the maximum, the service technician must perform the next step. The adjustment may possibly cause the highly or deeply colored area, such as in a photo, to become blurred on the copy.

Also, it may also cause offset failure, grained images and degradation in gradation. Therefore, carefully perform the adjustment, while checking the copy image. After selecting the Text or Map mode, copy and check the copy image quality. The adjustment may possibly cause a dark-colored area, such as in a photo, to become blurred on the copy.

To reproduce the hues of similar highlighters, such as yellow and green, while producing sharp contrasts on the copy, perform color adjustment color balance adjustment or RGB adjustment and color density adjustment. Then the tint of the red will be closely matched with that of M Magenta. Precautions after the completion of the adjustment Nothing in particular.

Then it will be copied in the Full color mode or the Black mode. But adjust the threshold value, in order to change the threshold between the Black mode and the Full color mode and suit the preferences of the user. After specifying the original size and copy size, copy and check the copy image quality. Therefore, carefully perform the adjustment, while checking whether any type of original is correctly detected. Red and black mode, or the boundary between black and colors other than black.

The tint of the color can be adjusted according to the density area low-, medium- or high-density area. Precautions after the completion of the adjustment Setting "1" for code may not provide a clear boundary between red and black. Subcode Area where the density is adjusted High-density area Medium-density area Low-density area Precautions after the completion of the adjustment Nothing in particular.

Only if further adjustment is still desired for the reproducibility of background, should this adjustment be performed. Darker background is reproduced than the one obtained when "3" is set.

Dark After setting the value, copy and check the image quality. Therefore, perform all the necessary adjustments. After setting the value, go to the next step. Set a value smaller than Automatic to make the image darker. Refer to the table below to enter the subcode for the area to be adjusted. Set a value larger Full color User custom than Also the area to be erased may change depending on the orientation of the original. Therefore adjust it carefully while checking the copy image. After the setting, copy and check the image.

If there is any page other than colored pages that cannot be omitted, the service technician must perform the procedure below. Therefore adjust the value carefully while checking the copy image. Automatic calibration is the basic adjustment to accurately reproduce colors on the printouts.

When you would like to accurately reproduce the desired hue or when you have replaced the consumables and changed the operating conditions, perform automatic calibration to ensure the color reproducibility. Precautions after the completion of the adjustment When image quality control is repeatedly performed, the color balance may slightly vary due to an error even in the same environment.

In this case, return to step h and realign the chart. Open the property page of the printer driver. Windows PS3 is performed but not on Macintosh or if a file created on the above applications is printed.

Toshiba E Studio 2040c Driver Download

Drivers & Software

Company names and product names in this manual are the trademarks or registered trademarks of their respective companies. In addition, this manual is expected to facilitate the marketing of Toshiba MFPs to prospective customers that have a specific demand for image quality and the expansion of sales. Purpose of the Imaging Manual Icons The following icons used in this manual denote the following: But "USER" can also be selected to allow the user to operate it. After performing automatic calibration, print and check the image quality. If further image quality adjustments are still necessary, use the next procedure.

Downloads & Support

Toshiba E Studio 2040c Driver Download

After you upgrade your computer to Windows 10, if your Toshiba Printer Drivers are not working, you can fix the problem by updating the drivers. It is possible that your Printer driver is not compatible with the newer version of Windows. Update drivers automatically - Novice computer users can update drivers using trusted software in just a few mouse clicks. Automatic driver updates are fast, efficient and elimate all the guesswork. Your old drivers can even be backed up and restored in case any problems occur. Update drivers manually - Find the correct driver for your Printer and operating system, then install it by following the step by step instructions below. There is no risk of installing the wrong driver. The Driver Update Utility downloads and installs your drivers quickly and easily. You can scan for driver updates automatically with the FREE version of the Driver Update Utility for Toshiba, and complete all necessary driver updates using the premium version. The Driver Update Utility for Toshiba will back up your current drivers for you.

0 thoughts on “Toshiba E Studio 2040c Driver Download

Leave a Reply

Your email address will not be published. Required fields are marked *