Download Driver For Radio Shack Usb Scanner Programming Cable 20-047 Install Update
All information here is Copyright by RadioReference. Ad Management by RedTyger. Hello All So I have been using this cable for over 10 years and also with Windows 10 with zero problems. After the Windows 10 Creators update the cable will not work and I still have the original driver CD but cannot get 10 to work with it. Any suggestions or where I can get a driver for it that works with windows 10? Do a Google search on "how to disable driver enforcement for Windows Once you disable driver enforcement, you will be able to load the driver from the CD and it should work.
Be aware that there have been reports of these drivers being disabled by Windows during a Windows Update. In other words, just because you managed to get it to work this time doesn't mean that it will work next month until you go through the whole driver enforcement disable rigmarole all over again. Just something to make our hobby a little more "challenging.
Tried several times and did not work. Windows says that it cannot find a driver for the device on the cd. This is the first time I've ever had a problem with this. Since it occured just after the windows 10 major update that has to be the cause.
Anyone with another suggestions? I really appreciate the help. Keep trying, this is the root of your problems.
Windows now has well, has had for awhile this wonderful "papa knows best" function built into it, to keep you from installing something potentially hazardous. Unfortunately, MS went about 3 steps too far with it. Of the things stolen in my little break-in episode last fall, I'm now pretty sure that my good old Windows 7 laptop is what I miss the most.: Try this link from FTDI http: I have been troubleshooting my Radio Shack Cable on a Windows 10 64 bit machine for several hours to no avail.
I've tried to disable the driver signature enforcement and have downloaded the ftdchip. How do I troubleshoot this further?
I'm frustrated and would like to reprogram existing radios. Any further help would be appreciated. I just plugged my into the computer and Windows 10 Creator v found the driver automatically and assigned it a Comm Port, no installation needed.
When I originally updated to Creator my RadarBox wouldn't work due to a driver issue but after the weekly updates were installed it worked again. Try checking for more updates, see if it helps. Is there a way to test the cable assembly to ensure it's not broken?
Can't get the cable to work in either a windows 10 or 7 machine. Both machines say it's a Com Port error. I have the orange one and it has always worked before. I honestly don't remember if I've used it since I upgraded my machine to W Did the cable work before?
When I rebuilt my Windows 10 computer all I did was plug the cable in and it automatically installed the driver and it works fine. I have both the RadioShack Orange and the GRE Blue cables and they both installed just fine without needing to download drivers.
Just finished a fresh clean install of Win10 on a new hard drive with all available updates including Founders update. Plugged in both my old cable and the GRE blue version. Win10 recognized both cables, downloaded and installed the correct drivers, and assigned a comport to them.
I was up and running with Win within a matter of seconds. I didn't have to disable unsigned driver restrictions or any other work-around. It was truly plug and play. Don't know why some are having problems, but the cables do work fine with fully updated Win There might be some obscure version issue at play here too.
They manufactured these cables over a period of time and there might be some older chipsets or perhaps a few counterfeits got mixed in the batches someplace. Try doing the Creator Edition update, this will show Windows v I know Windows has those drivers included. I don't know much about Windows Founders edition. Originally Posted by ermin Post Tried several times and did not work.
Originally Posted by ttprescott Post Is there a way to test the cable assembly to ensure it's not broken? Originally Posted by ermin Post Hello All So I have been using this cable for over 10 years and also with Windows 10 with zero problems. Originally Posted by fxdscon Post Same here.
The lowest-priced brand-new, unused, unopened, undamaged item in its original packaging where packaging is applicable. Packaging should be the same as what is found in a retail store, unless the item is handmade or was packaged by the manufacturer in non-retail packaging, such as an unprinted box or plastic bag. See details for additional description. RadioShack USB programming cable Took me a couple days to get this to work with Windows 10 but once you have the correct driver it works excellent. Should have done this years ago. Cable is very good quality and in original packaging with a CD and instructions I could not get this to work with windows 10 but I am no genius. I highly recommend this cable and if you program manually, once you get this working you will wonder why you waited so long. There are other benefits to this also like saving your different program files in a folder and being able to try different set-ups.
RadioShack USB Scanner Programming Cable and Driver Software 20-047
Please make sure that you are posting in the form of a question. Aftermarket equivalent to Radio Shack Mono connector. All Windows 10, 8. Cable drivers are installed by Windows automatically, no CD or downloads are required. Our products are made with the genuine FTDI chipset. Cable Installation instructions provided. All products ship from within the US. US based support and replacement warranty. BlueMax49ers manufacturers this product. No programming software included.